Vacuum Ancillaries
A range of ancillary vacuum equipment, connectors and mould inserts for use in VRTM and infusion processes.
Vacuum Regulator and Gauge – 100L/min Vacuum Regulator and Gauge – 100L/min MP-60-0100
To regulate vacuum level between atmosphere and -0.95 bar. Flow rate 100 litres/min.
Includes vacuum gauge and mounting bracket. Accurately regulates downstream vacuum regardless of upstream variation.
Vacuum Gauge XE-0250
Standard vacuum gauge with 1/8” BSP male fitting.
Vacuum Gauge – Oil Filled XE-0251
Standard oil filled vacuum gauge with 1/8” BSP male fitting.
Vacuum Hose Set – (with GEKA type connectors) XE-0204
2 no. 5m vacuum hoses including Geka connectors.
Vacuum Hose MP-82-0004
Heady duty braided reinforced vacuum hose 1/2“bore.
In Line Vacuum Filter MH-64-0002
3/8” In line Y type filter to prevent fibre movement and blockage in vacuum lines
In Line Vacuum Ball Valve MP-59-0005
Vacuum ball valve used inline to isolate vacuum lines as required
Geka hose connector with 3/8” BSP Male thread MP-35-1038
(other thread sizes available on request)
Geka hose connector with 3/8” BSP Female thread MP-35-0038
(other thread sizes available on request)
Geka hose connector with barbed hose-tail MP-35-2012
Geka connector suitable for fitting to vacuum hose MP-82-0004
Vacuum Bag Pipe Insert- Nut type XA-0352
Fitting for connect a 10mm OD diameter pipe into a vacuum bag.
Incorporates silicone seal around pipe compressed by screw-nut to prevent pull out.
Designed to sit over standard spiral wrap resin feed.
Vacuum Bag Pipe Insert- Grip-ring type XA-0350
Fitting for connect a 15mm OD diameter pipe into a vacuum bag. Incorporates an O ring for sealing and a grip ring to prevent pipe pull out. Designed to sit over standard spiral wrap resin feed.
Vacuum Bag – IMPS Sensor insert XA-0351
For fitting an IMPS (In Mould Pressure Sensor) into a vacuum bag. (Sensor supplied separately). Designed to fit over standard spiral wrap resin feed.
Vacuum Bag Sensor Insert – Supplied with Seal and Locking Nut XA-0056
Allows a sensor to be connected to a vacuum bag for vacuum/pressure monitoring. Complete with integral seal and locking nut
To specify an insert please use the appropriate part number and indicate quantity.
