Ciject® Injection Equipment
Exceptional engineering in a simple format. Introducing the CIJECT® range of equipment without compromise of quality, reliability or ergonomics.
Compare ProductsCiject™ Zero
The lowest cost machine in the Ciject™ range with simple and effective manual control system
More InfoCiject™ One
A sophisticated machine with programmable functions and an extensive level of control options
More InfoCiject™ Two
CIJECT™ Two- RTM/VRTM Injection Machine The most sophisticated machine in the range, the Ciject Two is …
More InfoCiject™ Three Range
The Ciject Three™ range of advanced pressure-vessel based machines. Designed to process pre-mixed or single-component resin …
More InfoCiject™ Four
CIJECT™ Four- RTM/VRTM Injection Machine Designed specifically for high volume ‘Direct Infusion’ processesBased on the proven …
More InfoCiject™ Five
CIJECT™ Five- Infusion Machine.The Ciject Five has been developed as an extension of the existing Ciject …
More InfoCIJECT™ – Metering / Dispensing Machine
A sophisticated machine with programmable functions and an extensive level of control options
More InfoMaterial Holding and Degassing tanks
A range of holding tanks that can be used with Ciject equipment
More Info
Silicone Spray Equipment
Exceptional engineering in a simple format. Introducing the SC range of equipment without compromise of quality, reliability or ergonomics.
Vacuum Equipment
A wide range of vacuum pumps and ancillaries for RTM, RTM light and Infusion. Select from a range of vacuum components for supply, connection, control and measurement of vacuum in your process.
Dry Vane Type
Vacuum Systems (Dry Vane Type) …
More InfoOil Lubricated Type
Vacuum Systems (Oil Lubricated Type) …
More InfoRotary Claw Type
Vacuum Systems (Rotary-claw type) …
More InfoVacuum Infusion Station
Vacuum Infusion Station with Resin Trap …
More Info2 litre Vacuum Catchpots/Resin Traps
2 litre Vacuum Catchpots/Resin Traps …
More Info30 Litre In-line resin traps/vacuum tanks
30 Litre In-line resin traps/vacuum tanks …
More InfoVacuum Ancillaries
Vacuum AncillariesA range of ancillary vacuum equipment, connectors and mould inserts for use in VRTM …
More InfoMaterial Holding and Degassing tanks
A range of holding tanks that can be used with Ciject equipment
More InfoIMPS (In Mould Pressure Sensor) System
IMPS (In Mould Pressure Sensor) SystemThe IMPS range of pressure sensors and readout units has been …
More InfoUltrasonic Leak Detector
Ultrasonic Leak Detector
More Info
Ancillaries
Ancillary process equipment and mould building accessories.
CiDAQ
CiDAQ – Data Acquisition SystemA compact and integrated data acquisition system for the monitoring and recording …
More Info2 litre Vacuum Catchpots/Resin Traps
2 litre Vacuum Catchpots/Resin Traps …
More Info30 Litre In-line resin traps/vacuum tanks
30 Litre In-line resin traps/vacuum tanks …
More InfoInjection Valve
Injection ValveThe Injection valve links the Ciject injection machine to the inlet port of a typical …
More InfoMould Inserts
Mould InsertsA range of mould inserts for use in VRTM and RTM tooling.
Some inserts are …
Vacuum Ancillaries
Vacuum AncillariesA range of ancillary vacuum equipment, connectors and mould inserts for use in VRTM …
More InfoMaterial Holding and Degassing tanks
A range of holding tanks that can be used with Ciject equipment
More InfoMould Seals
Mould SealsA comprehensive range of mould seals and ‘formers’ used in the mould-making process.
The D …
IMPS (In Mould Pressure Sensor) System
IMPS (In Mould Pressure Sensor) SystemThe IMPS range of pressure sensors and readout units has been …
More InfoWater/Oil Temperature Control Unit
Water/Oil Temperature Control Unit …
More InfoIn-Mould Air Ejector
In-Mould Air Ejector Valve …
More Info
Ultrasonic Leak Detector
Ultrasonic Leak Detector
More Info
Silicone Ancillaries
Ancillary equipment and mould building accessories.
Silicone
High quality two-part silicone ideally suited for use in Silicone Composites spray equipment.
Silicone Options: Silicone2 …
Mould Inserts (Silicone)
A range of mould inserts and ancillary items specifically designed for use in silicone moulds
Mould …
Materials
A range of materials used in the mould making process as well as the Diatex range of vacuum bagging consumables.
Silicone
High quality two-part silicone ideally suited for use in Silicone Composites spray equipment.
Silicone Options: Silicone2 …
Mould Inserts (Silicone)
A range of mould inserts and ancillary items specifically designed for use in silicone moulds
Mould …
Mould Inserts
Mould InsertsA range of mould inserts for use in VRTM and RTM tooling.
Some inserts are …
Vacuum Ancillaries
Vacuum AncillariesA range of ancillary vacuum equipment, connectors and mould inserts for use in VRTM …
More InfoMould Seals
Mould SealsA comprehensive range of mould seals and ‘formers’ used in the mould-making process.
The D …
Wax filler (yellow)
Wax Filler (Yellow) …
More InfoCalibrated Sheet Wax
Calibrated Sheet Wax …
More Info
Vacuum Bagging Consumable Materials
Composite Tooling
Composite moulds for RTM, VRTM and Infusion processes built for a wide range of applications.
Composite Tooling
Composite Tooling built in our specialist workshop by highly experienced technicians.Composite Integration has extensive experience in …
More Info
Test Panel Tooling
A range of tooling designed specifically for R&D and laboratory use.Available in various configurations with a range of pressure ratings, temperatures and instrumentation.
Test Panel Tooling (Option 1)
Option 1: Simple vacuum clamped mould with fixed cavity thickness
More InfoTest Panel Tooling (Option 2)
Option 2: Vacuum Clamped mould with screw-adjustable cavity thickness
More InfoTest Panel Tooling (Option 3)
Option 3: Mechanically Clamped mould with screw-adjustable cavity thickness
More InfoTest Panel Tooling (Option 4)
Option 4: Mechanically Clamped mould with outer shim-plate cavity thickness adjustment
More Info
Training
Training is available in RTM mould building, equipment operation and maintenance as well as general RTM and infusion processing etc
VRTM Mould Building Training
Training in building RTM tooling
More InfoRTM and Resin Infusion Familiarisation training
General process training.
More Info