Test Panel Tooling Test Panel Tool (Option 3)

Home Products Test Panel Tool (Option 3)

Adjustable Cavity RTM Test Panel Tool

500 x 500 mm mechanically clamped RTM test panel tool with a sophisticated screw adjustable cavity thickness mechanism.

Features include:

  • The lower mould is fixed with a moveable peripheral flange place which allows depth adjustment
  • The upper face consists of 25 mm heat toughened glass plate in a supporting steel framework to maintain accuracy at positive pressures
  • The upper mould is also available is machined aluminum if upper mould heating or high precision is required
  • Injection is via a peripheral injection gate with a central vent or vice versa
  • The lower mould and peripheral flange can be specified with fluid heating channels or integral electrical heating with the appropriate insulation
  • The glass upper face is hinged and supported on gas struts for ease of operation
  • A high temperature air ejector system is included with standard specification
Tooling Options
Universal Sensor Positions
  • Machined ports in the tool so it can accept an in-mould pressure sensor (IMPS) or thermocouple (T/C)
  • Blanking plugs are included to blank off the machined holes when not in use
  • Up to 4 universal sensor positions are available for IMPS and/or T/C's
    • High Temperature Air Ejector
  • In-mould high temperature air ejector designed to provide maximum air-flow with minimum interference with the mould surface
  • Designed to be fitted into either composite or metal tooling
  • Included as standard with all options
    • 2 Litre Catch-Pot
  • 2 litre inline catch-pot assembly with 1 x GEKA fitting
  • Designed to be used for vacuum connection
  • Included as standard with all options
    • Heating Options
    Fluid Heating
  • Recommended for heating up to 80°C
  • Protective insulation will be required for moulds operating above 50°C

    Fluid heating unit comprising of:

  • Stainless steel braided hoses
  • Temperature control unit with digital display of the set and actual temperature with 1/10 degree to read in °C or °F
  • Water operation heating capacity of 3 kW
  • Pump motor capacity of 0.75 kW
  • Power supply: 400V 50 Hz 16A 3P+N+E
    • Standard Electrical Heating
  • Recommended for heating of up to 180°C
  • Protective insulation will be required for tools operating above 50°C

    Electrical heating unit comprising of:

  • PID temperature controller with K-type thermocouple feedback from the tool
  • Control system to comprise all necessary electrical safety and gear control
  • Numerical display of setpoint and current temperature
  • Power supply: 400V 50 Hz 16A 3P+N+E
    • Advanced Electrical Heating
  • Recommended for heating of up to 180°C
  • Protective insulation will be required for tools operating above 50°C

    Advanced electrical heating unit comprising of:

  • PID temperature controller with K-type thermocouple feedback from the tool
  • Control system to comprise all necessary electrical safety and gear control including a back-up overtemperature protection system
  • 4" touchscreen control with graphs of heater temperatures
  • Controllable ramp rates for heating and cooling
  • USB port for data logging as a standard and the data is logged to CSV format
  • Additional datalogging inputs for IMPS and T/C's options are available
  • Power supply: 400V 50 Hz 16A 3P+N+E
    • Video Demonstration
    How to Specify/Order

    Item/Option NotesPart/Option Number
    500 x 500 mm Adjustable Cavity RTM Test Panel Tool4 bar pressure ratingXM-5103
    Heated Aluminium Upper Mould01
    Options
    Universal Sensor Positions
    Sensor Mounting Detail - One PortOptional machined hole for either IMPS or T/C21
    Sensor Mounting Detail - Two PortsOptional machined holes for either IMPS or T/C22
    Sensor Mounting Detail - Three PortsOptional machined holes for either IMPS or T/C23
    Sensor Mounting Detail - Four PortsOptional machined holes for either IMPS or T/C24

    Heating OptionNotesPart/Option Number
    Options
    Fluid Heating/Temperature Control UnitFor water or oil02
    Electrical Heating: Standard ControlLower tool cavity plate and peripheral flange (2 zones)03-04
    Electrical Heating: Standard Control - Third ZoneRequired if an aluminium upper mould is specified06
    Electrical Heating: Advanced ControlLower tool cavity plate and peripheral flange (2 zones)07-08
    Electrical Heating: Advanced Control - Third ZoneRequired if aluminium upper mould is specified09
    Data Logging Includes:

    Cavity plate heating
    3 x 0-10V IMPS outputs
    3 x Type-K T/C inputs

    Only available for advanced control, electrical heated option

    Does not include the sensors or thermocouples    		31
    Insulation BlanketRequired for moulds operating above 50°C10

    To specify a tooling configuration use the main test panel tool part number, followed by the required option numbers separated by a hyphen:

    e.g. XM-5103-02-07-08-09-10 specifies an Adjustable Cavity RTM Test Panel Tool with a fluid heating and temperature control unit and full advanced control electrical heating

    Browse the whole Test Panel Tooling series

    Test Panel Tool (Option 1)

    Test Panel Tool (Option 2)

    Test Panel Tool (Option 3)

    Test Panel Tool (Option 4)