Ancillaries Injection Valve

Home Products Injection Valve

Injection Valve

Connecting a Ciject® Injection machine to an inlet port of a typical closed mould.

Features include:

  • Design of the injection valve ensures straightforward isolation of the mould cavity and vacuum tight sealing, ensuring reliable and clean operation
  • Careful positioning of the material port allows use in deep mould structures with limited access
  • The valve is cleaned as part of the normal injection machine flush cycle and once cleaned, the valve can be disconnected from the injection machine
  • A combination of innovative design, robust construction and highest quality components ensure excellent reliability with a wide range of resin types under the harshest conditions
  • The use of an injection valve enables automation of the process and reduces the need for operation intervention
Injection Valve Options
High Temperature Version
  • This version is configured for continuous use at temperatures up to 150°C and short term use up to 180°C
  • Includes a torlon sealing tip, stainless steel shaft and a high temperature air cylinder
    • Stainless Steel Shaft Version
  • A stainless steel shaft provides a very robust alternative to the standard shaft if regular dismantling is required
    • Stainless Steel Body Version
  • All components that would come into contact with a resin material are machined in stainless steel
    • Phenolic Version
  • Phenolic version is configured for use with phenolic resin/catalyst systems
    • Resin Feed Hose
  • Resin feed hoses are available in 0.5 m, 1.0 m, 1.5 m and 1.8 m lengths
    • Quick-Couple Connector
  • The quick-couple connector that is used to connect a hose to the Ciject mix-head
  • Available in brass or stainless steel
    • Control Valve and Fittings
  • The control valve powers the injection valve from the pneumatic open/close signal from the Ciject Injection machine
    • Flush Waste Container
  • 25 L waste container used for excess material
    • Spares Kits
  • Spares kits containing all necessary service replacement parts available for all injection valve configurations
    • How to Specify/Order

    Machine Item/Option NotesPart/Option Number
    Injection ValveXE-0015
    Standard Version
    		01
    High Temperature Version
    		Continuous use up to 150°C
    Short term use up to 180°C
    		02
    Stainless Steel Shaft Version
    		03
    Stainless Steel Body Version
    		04
    Phenolic Version
    		05
    Infusion ‘Nose’ Version
    		06
    Options
    0.5 m Resin Feed Hose
    		10
    1.0 m Resin Feed Hose
    		11
    1.5 m Resin Feed Hose
    		12
    1.8 m Resin Feed Hose
    		13
    Brass Quick-Couple Connector
    		Connects to resin feed hose20
    Stainless Steel Quick-Couple Connector
    		Connects to resin feed hose21
    Control Valve and Fittings
    		25
    Associated Parts
    25 L Waste TankXE-0030
    25 L Waste TankIncludes 2 x inletsXE-0030-01
    Spares Kits
    		XE-0015-SK
    Standard Version
    		01
    High Temperature Version
    		02
    Stainless Steel Shaft Version
    		03
    Stainless Steel Body Version
    		04
    Phenolic Version
    		05
    Brass Quick-Couple Connector Option
    		06
    Stainless Steel Quick-Couple Connector Option
    		07
    Infusion 'Nose' Option08

    To specify a configuration use the injection valve part number followed by the required option numbers separated by a hyphen.

    e.g. XE-0015-01-12-25 specifies a standard injection valve with a 1.5 m resin feed hose, with a control valve and fittings

    Note: all specifications are subject to change without notice.

    Browse the whole Ancillaries series

    Data Logging System - CiDAQ

    CiDAQ

    2 litre Catchpot

    2 Litre Vacuum Catch-pots/Resin Traps

    30 ltr Vacuum Tanks / Resin Traps

    30 Litre Vacuum Catch-Pot/Inline Resin Traps

    Injection Valve

    Mould Inserts

    Vacuum Ancillaries

    Material Holding and Degassing tanks

    Mould Seals

    In-Mould Pressure Sensor (IMPS) Equipment

    In-Mould Air Ejector

    Wax filler (yellow)

    Calibrated Sheet Wax

    Mould Tool Clamps

    Ultrasonic Leak Detector