Vacuum Equipment Vacuum Infusion Station

Vacuum Infusion Station with Resin Trap

A mobile vacuum station including a 30L vacuum resin-trap- configured specifically for ‘resin infusion’ processes. Single stage, air cooled, oil filled rotary vane vacuum pump system, with the following:

  • Oil filled vacuum pump
  • Vacuum levels down to 0.2 mbar absolute
  • Oil mist separator with air exhaust filters, demisters and oil filter
  • Inlet filter with paper element fitted, outlet connected to vacuum catch-pot.
  • Fabricated steel vacuum catch-pot 375mm ID x 275mm High
  • Suitable for use with 10 litre plastic buckets
  • Aluminium lid with vacuum seal and clear window insert
  • DOL start/stop with motor overload protection
  • Mounted onto compact base frame with 2 x swivel/stop castors and 2 x fixed castors
Vacuum system options
Single Phase Supply Option
  • Larger (25 and 40³/hr) pumps can be specified for three phase or single phase supply
  • Absolute Vacuum Gauge
  • Digital display to provide readout of vacuum level from atmospheric pressure down to zero mbar
  • Hours-Run Meter
  • Electronic counter to record the total pump use in hours
  • Allows accurate planning of service intervals
  • How to specify / order

    Machine Item/Option NotesPart/option Number
    Vacuum Infusion Station
    4m³/hr Vacuum Pump system

    Single phase


    16m³/hr Vacuum Pump system
    Single Phase
    25m³/hr Vacuum Pump system
    Three Phase
    40m³/hr Vacuum Pump system
    Three Phase
    25m³/hr Vacuum Pump system
    Single Phase
    40m³/hr Vacuum Pump system
    Single Phase
    Absolute vacuum readout
    Hours-Run meter
    Full Switching Control12
    30L Resin Trap Assembly Lid OptionsAt point of order please specify the required through lid fittings on the 30L Resin tank.
    Please see options below:
    6mm (x4)13
    6mm (x8)14
    6mm (x12)15
    10mm (x4)16
    10mm (x8)17
    10mm (x12)18
    12mm (x4)19
    12mm (x8)20
    12mm (x12)21
    Vacuum Connectors:Connection for incoming vacuum line (from pump) Specify two connectors if the resin trap is to be used as a simple in-line emergency trap between a pump and mould
    GEKA (x1)22
    GEKA (x2)23
    ISO B (x1)24
    ISO B (x2)25
    Vacuum Pump Spares Kits

    Spares Kit- 4m³/hr Vacuum Pump system
    Spares Kit– 16m³/hr Vacuum Pump system
    Spares Kit– 25m³/hr Vacuum Pump system
    Spares Kit- 40m³/hr Vacuum Pump system

    To specify a configuration use the pump part number followed by the required option numbers separated by a hyphen.

    e.g. XV-0400-04-06-07 specifies a 40m³/hr Vacuum Pump with hours-run gauge and absolute vacuum readout.

    Note: All specifications are subject to change without notice: