Vacuum Equipment Oil Lubricated System

Oil Lubricated Vacuum system

Vacuum Systems (Oil Lubricated Type)

An oil-filled vacuum system ideally suited to ‘infusion’ type processes where high level vacuum is required.

Features include:

  • Reliable and robust oil-filled, air cooled rotary vane pumps
  • Achievable vacuum levels of 0.2 mbar (absolute)
  • Oil mist separator with air exhaust filters, demisters and an oil filter
  • Fitted with a replaceable cartridge filter to prevent dust and fibre entering the pump
Vacuum System Options
Single Phase Supply Option
  • Larger (25 and 40 m³/hr) pumps can be specified for single phase or three phase supply
  • Simple ON/OFF Control
  • Start/stop DOL control with motor overload protection
  • Full Switching Control
  • Digital display of vacuum gauge level
  • User adjustable digital switching unit to minimise pump operation whilst providing constant vacuum output
  • Automatically turns pump ON/OFF between pre-set minimum/maximum vacuum level settings
  • Control unit with MCB fusing, motor overload protection, and solid-state relay power switching
  • Absolute Vacuum Gauge
  • Digital display to provide readout of vacuum level from atmospheric pressure down to zero mbar (absolute)
  • Hours-Run Meter
  • Electronic counter to record the total pump use in hours
  • Allows accurate planning of service intervals
  • Small Reservoir
  • 20 litre vacuum reservoir
  • Includes two vacuum take-offs
  • One vacuum take-off is fitted with a regulator, providing a constant downstream, vacuum independent of upstream variations
  • Large Reservoir
  • 200 litre vacuum reservoir
  • Includes six vacuum take-offs
  • Three vacuum take-offs are fitted with regulators, providing a constant downstream, vacuum independent of upstream variations
  • Frame Mounting
  • The pump is mounted onto a simple compact base frame with 2 x swivel/stop castors and 2 x fixed castors
  • This option is required if a control option is chosen but does not include a reservoir
  • How to Specify/Order

    Machine Item/Option NotesPart/Option Number
    Vacuum System (Oil Lubricated type)
    4 m³/hr Vacuum SystemSingle phase
    XV-0200-01

    16 m³/hr Vacuum SystemSingle phase
    XV-0200-02

    25 m³/hr Vacuum SystemThree phase

    XV-0200-03

    40 m³/hr Vacuum SystemThree phase
    XV-0200-04
    25 m³/hr Vacuum SystemSingle phaseXV-0200-05
    40 m³/hr Vacuum SystemSingle phaseXV-0200-06
    Options
    Simple ON/OFF Control
    10
    Full Switching Control
    11
    Absolute Vacuum Readout
    12
    Hours-Run Meter
    Available with either control option (simple or full switching)
    13
    Small Reservoir
    Suitable for 5 or 10 m³/hr pumps
    20
    Large Reservoir
    Suitable for 40 m³/hr pumps
    21
    Frame Mounting
    Required if a control option is chosen but does not include a reservoir

    22
    Vacuum System Spares Kits4 m³/hr pump (R5)
    XV-0200-SK-01
    16 m³/hr pump (R5)
    XV-0200-SK-02
    25 m³/hr pump (R5)XV-0100-SK-03
    40 m³/hr pump (R5)
    XV-0100-SK-04

    To specify a configuration, use the vacuum system part number followed by the required option numbers, separated by a hyphen:

    e.g. XV-0200-04-11-21 specifies a R5 40 m³/hr vacuum system with the three phase option, full switching control and a large reservoir.

    Note: All specifications are subject to change without notice.

    Examples of Typical Configurations

    A small, mobile vacuum system with simple control
    Configuration part number: XV-0200-01-10-22

  • 4 m³/hr oil-filled pump
  • Simple ON/OFF control
  • Frame mounted
  • Vacuum system configured with a reservoir and multiple outlets
    Configuration part number: XV-0200-03-11-21

  • 25 m³/hr oil-filled, three phase pump
  • Full digital switching unit to minimise pump operation whilst providing constant vacuum output
  • 200 litre reservoir with six vacuum take-offs (three vacuum take-offs are fitted with regulators to provide a constant downstream, vacuum independent of upstream variations)